8 Easy Steps for Swimming Pool Maintenance

The longevity of any Water Pump depends on how we care for them. Without the swimming pool pump, you can not keep sanitary in the swimming pool. 

Let’s understand the role of a well-functioning swimming pool pump. It pulls water from the pool. Then, it filters away debris and dirt from the water. Then, neat and clear water is sent back into the pool. In this way, the water pumps take care of the hygiene of the swimming pool.

In this article, you will read some essential steps to operate the pool pump efficiently. Let’s understand how to maintain the Swimming Pool Pump to enhance its lifespan and protect money from expensive repairs.

• Avoid expensive repairing

If you regularly take care of the pool pump, you can prevent expensive repairs. You should be alert for broken parts, rusting parts, abnormal sounds, and damaged bodies. You can call the technician to fix up the problem at the early stage. In this way, you will save both money and pump.

• Check filter regularly

You should check the filter’s gauge reading at least once a week to monitor the pressure on the water pumps. If the pressure of the pump is above 10psi, you should clean the filter immediately. You should remove the debris and dust from the filter. This helps in the smooth functioning of the motor pump. 

• Cleaning of the pump basket

A pump basket is an integral part of a pool pump. You should clean it regularly to prolong the life of the motor pump. The blockage of debris can restrict the water flow in the pump. Therefore, you should open its lid to remove the debris from it. For better efficiency, you can lubricate the O-rings of the basket lid.

• Clean the outer area of the pump.

You should not only clean the inner components but also the outer area of the pump whenever you find unnecessary garbage there. The dry leaves and debris can block the vents of the pump. If they are blocked, then the pump will become hot. Therefore, you should prevent such garbage from being collected around the pump. Furthermore, use a damp cloth once a week to clean the pump surface.

• Have a proper water level in the pool.

The water level in the pool should be adequate. Otherwise, the pool pump will start sucking air instead of water. This can damage the motor properly.

• Replace the old pump.

If your pool pump has become very old and your technician is telling you about an expensive repair, you should not go with the repair option. Replacing the old pump with the new pool pump will be good. The cost of a new pool pump will be lower than the repair cost. Furthermore, it will not be damaged again and again like the old one.

• Call the technician yearly.

You should call the technician yearly. He will check moisture leaks and bearings of your water pumps. The moisture leaks should be repaired; otherwise, the bearings of the motor pump will be damaged. One yearly technician visit will help resolve any issue with the pool pump.

• Use the Lubricants 

You should investigate the bearings of the motor frequently. The moisture leaks can damage the bearings. Therefore, you should use the lubricants in the bearings to avoid the risk of damage.

See More – School Ranking

Final Words

Follow the instructions mentioned above to prevent any risk of pump damage. The expensive repair will not make any big hole in your pocket. A smooth-functioning swimming pool pump can give your pool a healthy and sanitary environment.